DIY Hand-Painted Pallet Signs

These DIY pallet signs make a beautiful gift that is sure to be loved for years to come! Or you can create one for yourself  and enjoy the hand-crafted goodness in your own home.

I know I’ve been promising to share the gift I made for my friends’ wedding last weekend, and didn’t want to make you wait any longer! My friend, Lara, asked me a couple of months before her wedding if I would make some signs with special Scriptures on them for her wedding.

She also wanted to be able to hang them in her home. Isn’t that such a great idea? I love being able to use something for an event and then continue to enjoy it after the party is over. And the idea of giving a hand-made gift sounded perfect! This post contains affiliate links for your convenience. See my fill disclosure policy here.

Materials Needed to Make DIY Pallet Signs

• wood planks from a pallet or the hardware store
• Kreg Jig (A must have tool for any serious DIYer!)
• Contact paper
• Silhouette Cameo or stencils (I love my Cameo for creating custom stencils.)
• Painter’s tape or Transfer Paper
• Mod Podge
• Foam paint brush
• Paint

Instructions:

First, I removed my boards from my pallet. I use my DEWALT Reciprocating Saw with a demolition blade for cutting through wood and nails. A sharp, new blade will cut through the pallet joints very easily. Sometimes I knock the boards loose with a hammer first and then cut through them with the saw.

Once I cut off enough boards, I laid them side-by-side on the ground to make sure they fit well together. I had to rearrange them a few times to make them work.

I used my Kreg Jig to attach my pallet planks to each other. In my opinion, if you do any kind of wood-working projects, then a Kreg Jig is a must. It is my favorite tool in my garage. And it makes attaching wood side-by-side and creating joints a breeze!

Once I got them all attached, I did have to attached a couple of reinforcements on the back of one sign. And if you don’t have a Kreg Jig, then you can use this method entirely. Just get a couple of scrap wood pieces that run the width of your sign and screw them into each board. I did this with my pallet sign on my mantel before I had my Kreg Jig.

Then I sanded my signs with my orbital sander. I didn’t get a picture of this step, but it’s pretty straight forward. 🙂

I wiped the sawdust off with a damp cloth and brought them inside. I painted them this beautiful green color that the bride picked out. It’s called Pantone Online Lime and I had them mix me up a sample pot of it at Lowe’s.

 Now, here comes the time consuming part…

I am going to try to explain how I designed the typography on the signs, but I’m such a novice at Photoshop Elements and using my Silhouette Cameo. So, don’t laugh at me. This is me winging it… and maybe you’re a winger too, so you’ll get this. A winger, not a swinger … just making sure you’re still with me. 🙂

I started in Photoshop Elements, because I knew I could create a document using the same measurements at my board. That way all of my letters would be to scale.

And then I just started designing my signs. I used these two fonts: Cochin and Chopin Script.

Once I had everything arranged just the way I wanted, I went into my Silhouette Studio software and used the same font size that I was using in Photoshop Elements and cut my words out of plain white contact paper. The last time I made a sign with my Silhouette, a kind reader alerted me to the fact that I could use contact paper or shelf liner for adhesive stencils. And it worked like a charm!

I used this tutorial from Shanty to Chic for my Silhouette settings. And the only thing I changed was I set my blade to level 2 instead of level 1. That way it cut through the sticky layer of the contact paper and didn’t cut through the backing. I could then remove each letter one at a time and place it on the board.

Let me tell you … this took forever! {Update: now I know I could have used transfer paper, which would have been … awesome!!}

{I used painter’s tape as a guide to keep my words from being wonky.}

The script letters took the longest to place because of all the squiggly lines, but I love the script, so it was worth it. I finally got smart with the second sign and realized I could pull the backing off of the word and the sticky side would stay in place as I pressed it all down on the board. And then I just peeled up anything that was unwanted. Much faster. {Sorry I didn’t get a pic of this process.}

Once all of my letters were down, I used a trick I found from Sugar Bee Crafts.I painted around all of my letters with Mod Podge! That way if there was any bleed underneath the stencils, then it would be clear Mod Podge and not white paint. How handy!!

You can see in the picture below the white stuff around “Beauty,” “ashes” and “Joy.” That would be the secret ingredient doing its trick!

I let the Mod Podge dry. Then I took some of my Sherwin Williams Antique White paint that I had on hand and kind of dry brushed it on in all different directions. I wanted it to be a thin coat and let the green come through in spots.

(Yes, I know that “dispair” is misspelled. #facepalm)

After the white had dried most of the way, I peeled off the white contact paper to reveal the beautiful green beneath. I didn’t wait for it to dry completely because I probably forgot to mention that I was finishing these up at 2 am, the day I was leaving for the wedding. Um, yeah … I should have started on these a little sooner.

I always say I do my best work on a deadline, so there you have it. 🙂

I absolutely love – a million times over – how they turned out. I can’t to make some for my own house. I’ve been wanting to make some for my master bedroom for years now … and I think now that I’ve tried it out on a friend, I can do it for myself. Ha!

Just a little note: there was some bleeding underneath the stencils where the letters overlapped where two boards met, but I thought it looked fine. If you don’t want that to happen, then you probably don’t want to have letters overlapping two boards.

I love how all of the thin scripty parts came out. Can you have a crush on “scripty parts?” I think you can. Swoon. Swoon. Swoon.

Seriously, this is my favorite DIY project yet. And I don’t say that about every one. I can’t wait to make more. I’m just going to keep saying that until I do make more. 🙂

Are you wondering what these looked like at the wedding?

Well, I was too busy having fun that I completely forget to snap a pic. But one of the other bridesmaids happened to grab a one with her iPhone, so I’ll share what I’ve got.

This was on the table as guests entered the wedding.

So pretty, right?

I hope you’re inspired to make a sign of your own. I just love how beautiful they are and can add such a personal touch to your home!